I had attached the lid of Plate and Air cleaner, but I think that it was good that you also had Sensor's Cancellation and Complete Bolt-on
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
I had attached the lid of Plate and Air cleaner, but I think that it was good that you also had Sensor's Cancellation and Complete Bolt-on
Fits: HONDA CB1100 10-16
These block-off plates fit perfectly and have a real nice finish. It isn't glossy like the rest of the Honda engine, but the satin finish looks good. They have the dimples on the bottom to fit the mounting screws for the baffles, so they don't have to be removed. This is the way to go if you want to do more than just plug the air hoses.View Detail
Fitted my Australian model well. The airbox plug is a good inclusion. Well made and solid. Only way it could bd better was if they were silver to match the valve cover.View Detail
AfterFireI installed it when I heard that it was preventing ya.
The Exhaust System is very special, so when the Axel was returned even a little, it was a little stressful, but after installing it, it became much better.
The installation was easy and even a beginner like me could do it. (^-^)View Detail
I was researching on the Net when I decided to replace the Exhaust System.
If you just replace it, it may cause fuel mixture to deteriorate and power down.
BackFire a or … well, there are some.
Computer rewrite or Sub computer.
At first, I decided to try this one, which is the cheapest.
The secondary air was cancelled at the same time as the Exhaust System replacement.
It is not like a bread pan like BackFirea.
I honestly don't know about Power down.
What is more important is that the engine braking has become very Mild.
This is probably felt by all of you, isn't it?
I knew I was right to do it! LOL!View Detail
Full normalInstalled on a 2015 R3.
I bought this product after learning on the Internet that cancelling AIS can reduce unnatural engine braking.
One of the effects I felt after installing it was
1.The awkwardness that I had at 2000~3000 rpm is almost gone.
2.When I open the throttle to a certain degree and start the car, the "thump" that occurs is almost gone.
3.When ThrottleOff is turned on, the unnatural and unpleasant engine braking that occurs around 3000~3600 rpm has become normal.
4.For some reason, the vibration transmitted to the grip and footpeg is reduced, and cruising at 100km/h in 6th gear is easier than before.
I was able to get effects beyond my expectations such as
So far, I have not felt any demerit by installing it, but one possible demerit is that it will probably not pass the vehicle inspection, so you will have to put it back when the vehicle is inspected. (That's where it gets messy.) I think it's about the same.
I think this is a good product for people who feel uncomfortable riding the Initial ModelR3.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING