I think that it is a good quality, reliable Manufacturer, and also excellence in Cost performance can not be missed.
It looks nice, there is also a sense of quality and the impression of Motorcycle also changes. I think that it is recommended product by all means.
Fits: SUZUKI GSX1300R Hayabusa 08 [Frame No.] JS1GW72A-82100001 or later GX72A, SUZUKI GSX1300R Hayabusa 09 [Frame No.] JS1GW72A-92100001 or later GX72A, SUZUKI GSX1300R Hayabusa 10 [Frame No.] JS1GW72A-A2100001 or later GX72A, SUZUKI GSX1300R Hayabusa 14-20 [Frame No.] GX72B-100001 to 100997 GX72B
If you ask a motorcycle shop, it will cost you a 10,000 yen bill, so I installed it by myself. I bought a Chinese 22mm hole saw for 498 yen and waited for 3 weeks. I bought a Rear Wheel stand for 1980 yen from Amazon (This is GSX1300R HAYABUSA easily raised and works more than the price) and used Front Wheel Clamp. Confirming the position of the hole opening with the attached paper, first of all, from Left. The position of this one was decided in one shot, but the Right Side has been gapped about 1 cm, and it was able to adjust and install after a shaky start. The adjustment part is hidden by the protector, so it looks OK.View Detail
Fits: SUZUKI GSX1300R Hayabusa 08 [Frame No.] JS1GW72A-82100001 or later GX72A, SUZUKI GSX1300R Hayabusa 09 [Frame No.] JS1GW72A-92100001 or later GX72A, SUZUKI GSX1300R Hayabusa 10 [Frame No.] JS1GW72A-A2100001 or later GX72A, SUZUKI GSX1300R Hayabusa 14-20 [Frame No.] GX72B-100001 to 100997 GX72B
I worked off the Cowl
Relying on the provided pattern, drill a hole with a hole saw of the same diameter against the ROD diameter φ22!
After the Cowl restoration, the hole is fine tuned and expanded with Leutor and completed
The accuracy is perfect, and I'm satisfied with Large, but it took me half a day to attach and detach the LeftCowl (Sweat)View Detail
Fits: SUZUKI GSX1300R Hayabusa 08 [Frame No.] JS1GW72A-82100001 or later GX72A, SUZUKI GSX1300R Hayabusa 09 [Frame No.] JS1GW72A-92100001 or later GX72A, SUZUKI GSX1300R Hayabusa 10 [Frame No.] JS1GW72A-A2100001 or later GX72A, SUZUKI GSX1300R Hayabusa 14-20 [Frame No.] GX72B-100001 to 100997 GX72B
I had them on another vehicle before It tipped over when I lent it to my son and it reduced Damage considerably
I wanted to install it on GSX1300R HAYABUSA, but I was reluctant to do so because of the need to drill a hole in the cowl I was
I bought it because other imprints said it came with a pattern and was easy to make holes in
However, the Instruction Manual initially drills a hole in 20mm and the dimensions of the collar It was spread out with File to 22mm, but realistically, the finish will be dirty
I drilled the holes from the beginning with a 22mm Hole saw
I worked from the Left Side first, but this one was fixed and installed in one shot
Right Side, followed the pattern and carefully drilled a hole, but seemed to Gap forward about 2mm In order to have become not to fit with Screw hole, it corrects with Cutter and File
The shape of the hole is not clean, but if you wear the Body, it is not noticeable
However, the work of desperately widening the hole in File is very Large strange
I worked on the Stick File, but if I was clumsy or forceful enough to scrape it off, the momentum was enough to get it to Cowl 2 It was scratched in about a few places
Be careful when applying files
I wish the stencils were more accurateView Detail
Fits: SUZUKI GSX1300R Hayabusa 08 [Frame No.] JS1GW72A-82100001 or later GX72A, SUZUKI GSX1300R Hayabusa 09 [Frame No.] JS1GW72A-92100001 or later GX72A, SUZUKI GSX1300R Hayabusa 10 [Frame No.] JS1GW72A-A2100001 or later GX72A, SUZUKI GSX1300R Hayabusa 14-20 [Frame No.] GX72B-100001 to 100997 GX72B
As for installation, when Cowl was removed, Cowl's
Drilling was done.
I think you can do it while it is attached
Sponge inside Cowl and Cowl's facet are Engine part
Because it enters into, it is troublesome, but when you remove it to do it
It is recommended.
I think that the effect will be useful for standing.
I'd like to have not only Black but also other colors.
View Detail
Fits: SUZUKI GSX1300R Hayabusa 08 [Frame No.] JS1GW72A-82100001 or later GX72A, SUZUKI GSX1300R Hayabusa 09 [Frame No.] JS1GW72A-92100001 or later GX72A, SUZUKI GSX1300R Hayabusa 10 [Frame No.] JS1GW72A-A2100001 or later GX72A, SUZUKI GSX1300R Hayabusa 14-20 [Frame No.] GX72B-100001 to 100997 GX72B
I thought that if I reduced the Damage with standing gobble I attached it like a charm. Cowl requires drilling but since there is a pattern paper it can be drilled to drill.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING