4.81 USD
(728 JPY)
4 (7 Reviews)
Very Good
เป็นสินค้าที่คุ้มค่าฉันสั่งมาที่ประเทศไทย ได้รับสินค้ารวดเร็วสินค้ามีการแพ็คทีาดี คุ้มกับราคา การใช้งานดีเยี่ยม อย่างที่ในประเทศฉันหาไม่ได้I ordered to Thailand. Get goods fastThe product is well worth the price. As in the country I can not find.(translated by Google Translator)
Reviews For MINIMOTO Compact Meter Bracket From Other Webike User
Excellent
Useful for installing easy passIt is very small, cheap, but incredible useful to install an easy toll pass device on and also other little accessories like a gear indicator. Highly recommend.View Detail
Very Good
ShiftIndicator installation.This Bracket is used to place the Shift Indicator on the Left side of the Tachometer, and the M5Bolt on the Meter Pedestal.
The hole of Bracket is 8mm, and it is a little bit large, but it was convenient to be able to slide and adjust the position. Because this Screw hole is facing to the slant, it was necessary to bend the Bracket so that the Indicator may face the front, but it is easy to bend it because it is Aluminum.
The short side of the installation surface was Exactly to the width of the Indicator Body of Protec which I installed this time. The long side is longer than the length, so you need to cut it.
Anyway, I'm grateful for this low price. I just wanted a Black one (I'm putting up a Film for the image).View Detail
Excellent
Shift indicators and water temperature systems!I put a Shift indicator on my WR250X that I use for road racing. I bought it as a bracket for it.
I think it's perfect for the AF meter and the water and oil temperature meter in terms of size Material:Because it is aluminum, it is easy to modify the angle and twist as you like. Recommendation.
When you want to be strong, it's cheap and you can buy two sheets and instantaneously glue them together to make it stronger. (Lol)
A good size bracket that is cheap, easy to process and easy to reach. Recommendation.View Detail
Poor
It didn't workIt is the one that pulled out a thick aluminum plate, and uses the AquaPRO? of DAYTONA I bought it for the sake of it, but I ended up not using it because I had a surprisingly difficult time finding a place to install it
It's not that the performance of the product is bad, but it's a little bit large, and the angle of the foot is delicate You should think carefully before buying because of
If you have a Skill or tool that can cut out a steel plate, you may want to make your ownView Detail
Very Good
Perfect for Meter on AquaPRObaI was looking for a small, compact unit to put together, as I don't have the installation space for a 4mini As I thought, it's perfect for the AquaPROba CompactMeter! 。
The price is cheap, so that helps...I wish there was an Offset one for 30° or so If you can bend it, thoughView Detail
Most Viewed Reviews Of MINIMOTO Meter Bracket
Excellent
Useful for installing easy passIt is very small, cheap, but incredible useful to install an easy toll pass device on and also other little accessories like a gear indicator. Highly recommend.View Detail
Very Good
ShiftIndicator installation.This Bracket is used to place the Shift Indicator on the Left side of the Tachometer, and the M5Bolt on the Meter Pedestal.
The hole of Bracket is 8mm, and it is a little bit large, but it was convenient to be able to slide and adjust the position. Because this Screw hole is facing to the slant, it was necessary to bend the Bracket so that the Indicator may face the front, but it is easy to bend it because it is Aluminum.
The short side of the installation surface was Exactly to the width of the Indicator Body of Protec which I installed this time. The long side is longer than the length, so you need to cut it.
Anyway, I'm grateful for this low price. I just wanted a Black one (I'm putting up a Film for the image).View Detail
Excellent
Shift indicators and water temperature systems!I put a Shift indicator on my WR250X that I use for road racing. I bought it as a bracket for it.
I think it's perfect for the AF meter and the water and oil temperature meter in terms of size Material:Because it is aluminum, it is easy to modify the angle and twist as you like. Recommendation.
When you want to be strong, it's cheap and you can buy two sheets and instantaneously glue them together to make it stronger. (Lol)
A good size bracket that is cheap, easy to process and easy to reach. Recommendation.View Detail
Poor
It didn't workIt is the one that pulled out a thick aluminum plate, and uses the AquaPRO? of DAYTONA I bought it for the sake of it, but I ended up not using it because I had a surprisingly difficult time finding a place to install it
It's not that the performance of the product is bad, but it's a little bit large, and the angle of the foot is delicate You should think carefully before buying because of
If you have a Skill or tool that can cut out a steel plate, you may want to make your ownView Detail
Very Good
Perfect for Meter on AquaPRObaI was looking for a small, compact unit to put together, as I don't have the installation space for a 4mini As I thought, it's perfect for the AquaPROba CompactMeter! 。
The price is cheap, so that helps...I wish there was an Offset one for 30° or so If you can bend it, thoughView Detail
Other Reviews From NO NAME
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING