Plate pitch: 44mm Material: duralumin material Finish: All billet anodized finish [Product Description] ・Adapter gasket ・Mount bolt ・Mount bolt gasket
*The information on the compatible models is for reference only and does not guarantee the installation.It may not be able to be installed depending on the specifications of your vehicle, so be sure to check the condition of your vehicle. *In case of using the adapter plate, it is necessary to enlarge the strainer opening of the gasoline tank by about 1-2mm in order to install the 3 / 8NPT size cock. *For products imported from overseas, it may take 1-2 months to order when the product is out of stock at the manufacturer.
* The image is only for reference. The image shown may differ from the actual product.
A special adapter is required to install the Pingel High Flow Cock. There are two types of gasoline tank faucet mounting: plate type and nut type.Please choose according to the type of vehicle to be installed. There are several sizes (pitches) of both plates and nuts, please refer to the figure.
[Reference: Strainer Size (Diameter)] 1 / 4NPT: 10.0m / m For vehicles with displacement less than 1000cc 3/8 NPT: 13. 0m / m For vehicles with displacement of 1000cc or more
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Fits: KAWASAKI GPZ750R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI GPZ750R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI GPZ900R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI GPZ900R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI Z1000 (air-cooled | KZ) (A2) PINGEL 6000 series are recommended
It's a Birdie, but I use it to mount the Powko Cook from FOR HARLEY It is also possible to use a different Offset to interfere with the Carburetor and Cook It is also beneficial for avoidance The Tap is a bit special, so it's a bit sluggish to make it yourself … View Detail
Fits: KAWASAKI GPZ750R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI GPZ750R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI GPZ900R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI GPZ900R NINJA Recommended to use the PINGEL 6000 series, KAWASAKI Z1000 (air-cooled | KZ) (A2) PINGEL 6000 series are recommended
PINGELPinGel : Single Out High Flow Fuel Cock 1 / 4NPT with Reserve http : / / www. webike. net / sd / 21354242 /
I purchased it at the same time and attached it to the GSX 1100S. Carburetor on CR33 This Plate and PinGel combination can be installed without problem.
Compared to NORMAL, switching between ON and OFF Cooks has become easier but the impression is that the performance does not change at all. In principle, the flow rate of Gasoline may become faster, but ,,,,View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!