When installing, I attach Bracket so that it crosses Seat rail, but I can not afford it, and in Frame
Wound will come with absolutely. (Wound is not noticeable if the position is determined by one shot)
I thought it would be more like creating a structure that sandwiches even cushioning materials with more allowance. Also, if Cap bolt is Steel
Because of, rust etc. Be concerned. Because the distance between the tip cover and the footpeg's tip is small, you need a Side cover
When removing, you need to be careful not to add Wound.
[How is it used?
The Tandem Footpeg is gone because the OEM Brake and gearshift Rear Sets have been replaced.
So we chose to keep two people on board.
To install, simply insert it into the seat rail.
The footpeg can reuse OEM, but we use Black's separately.
I was able to install the footpeg with no problem and Scauper quickly.
The position is higher than OEM, but if you are a Small pattern person, you can use it for Touring.
As a necessary element for city driving.
Plate is shaved, so it has a sense of luxury.
There are more expensive ones out there from other Brands, but I wanted to keep the cost down if I'm going to use it very little, i.e., if it's just for appearance without function.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
as expected
[Included Parts:were they on?
Smallest limit
[Was there anything that disappointed you?
NoneView Detail
Since the Battle step was attached to Kawasaki gpz900r.It attached.For using actually putting back, mounting instruction is worries for a while.View Detail
Structure is solid and satisfactory.Attachment was simple, and although it was easy, since it had to remove to the Rear fender, it was troublesome.I also processed a part of Fender processing and Side cover.I think that the Side cover probably also had to be cut off since UP processing of the Seat rail was carried out in my case.Although the run by a Tandem had not been carried out yet, he bought it once for the automobile inspection.View Detail
Originally, although it is an object for GPZ900R, it is appropriation use to GPZ1000RX.
(Direct attachment was carried out at the frame) The well of the structure is carried out very much, and
It purchased with change to the muffler of an up type.
Originally, although it is an object for GPZ900R, it is appropriation use to GPZ1000RX.
(Direct attachment was carried out at the frame) The well of the structure is carried out very much, and a tandem step bracket is enough also as texture, although it is not complicated parts at all.
I thought the more valuable product than a price.
External tandem SUTEMMU of 900R has no mistake with KONO products... if it takes in its hand -- solution loan measure.
Cost performance is the highest.View Detail
Since it can do what without a tandem step, it purchases immediately.
Since it was the cut necessity for a rear fender according to the attachm
It decides carrying the 2nd automobile inspection into an inspection field by oneself, and receiving it.
Since it can do what without a tandem step, it purchases immediately.
Since it was the cut necessity for a rear fender according to the attachment description, the circumference of a tail was made into nakedness, but even if not cut after all, when pushing in stay, it has attached.
However, since the stay of the tandem step was attached to the top of a frame in order to avoid interference with right-hand side silencer stay and the reserver of an ohlins, the work of a side cover part cut occurred.
Although texture is OK, it will be saved if some are cheaper.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING