[Material] ・Spring hold ring part: Machined from special stainless steel alloy Muku, processed with special quenching ・Roll ball: Special bearing steel balls
*Chameleon Factory torque camshafts are required for the '04 and later JOG models.
The new system realizes sliding that is difficult with commercially available "slide bearings"! Ball bearings in the retainer!
The ball bearings are not arranged in a fan shape with small metal pieces in the shape of rods toward the center of the doughnut as in the case of ordinary off-the-shelf slide bearings. The spring hold ring (movable part) is designed to prevent the spring from opening up due to centrifugal force on high-tuned machines, and the spring guide shape prevents the spring from opening up at high RPM At first glance, the drivetrain seems to move smoothly, but frictional resistance occurs when the center spring and the torque cam (or the contact surface on the clutch side) twist the torque cam action.
Torque camshaft strokes up and down while twisting itself, so the more the cam groove (power slit) is laid down to make the kickback characteristic stronger, the more the cam itself moves "while twisting" when it strokes (opens and closes). At that time, the center spring is twisted and compressed, and a strong resistance is created between the two ends of the spring, and in addition to the original force of the center spring, this resistance gives resistance to the torque cam that tries to move by twisting.
The two ends of the spring rub against each other and move a little while showing the resistance value. However, this does not allow for a proper drivetrain setup and smooth shifting. Especially in street battles or lap races where you have to kick back frequently, the drivetrain setting changes from the beginning to the end, and you are often told that your bike is getting tired. The center spring is also not in good condition because it is extending and retracting with the opposite torsional resistance.
We have developed a system that allows this part to slide "perfectly" without any resistance and without interfering with the tension value of the pure center spring and the movement of the torque cam. The thickness of the system itself is about 4mm at the center spring receiver, which is extremely thin and does not affect the performance of other parts.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
It's much easier You can see that the Torque Camshaft is working properly without distortion When you put this on, because SenseP is hard even in OEM, Reinforcement Spring is not recommended
I don't know how durable it is, as I haven't been using it for a long time View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!